Establishment ofthe Machine Model and BuildingaReasonable Working Mode for Windrow Straw Harvester

Received: 26-01-2018

Accepted: 10-08-2018

DOI:

Views

2

Downloads

0

Issue: Vol. 16 No. 5 (2018)

Section:

KỸ THUẬT VÀ CÔNG NGHỆ

How to Cite:

Minh, N., & Duc, B. (2024). Establishment ofthe Machine Model and BuildingaReasonable Working Mode for Windrow Straw Harvester. Vietnam Journal of Agricultural Sciences, 16(5), 511–518. http://testtapchi.vnua.edu.vn/index.php/vjasvn/article/view/466

Establishment ofthe Machine Model and BuildingaReasonable Working Mode for Windrow Straw Harvester

Nguyen Trong Minh (*) 1 , Bui Viet Duc 1

  • 1 Khoa Cơ-Điện, Học viện Nông nghiệp Việt Nam

    • Keywords

    Rice straw, windrow straw harvester

    Abstract


    Rice straw after harvest need to cut and dry before collection and storage. Large volume of rice straw to be handled in a short time requires mechanical operation. At present, the collection system was established, but the number, types and features remain limited and mainly used to collect straw after harvest. The article introduces the basis for the establishment and construction of a rational working mode of the windrow straw harvester. The machine system was designed on the basis of combining two-wheeled tractor power and rice harvesting device widely used today. With this solution, a windrow straw harvester can be quickly constructed with a reasonable working mode, meeting the practical requirements and raising the efficiency of agricultural production.

    References

    Lê Văn Bích, Đỗ Đình Thi (2011). Tính toán và lựa chọn một số thông số chính làm cơ sở cho thiết kế chế tạo mô hình máy gặt lúa liên hợp với máy kéo nhỏ ở đồng bằng Bắc bộ. Tạp chí Khoa học và Phát triển, 8(6): 1011-1016.

    Nguyễn Sỹ Hiệt (2010). Nghiên cứu thiết kế bộ phận cắt gặt và chuyển tải lúa đứng cây liên hợp với máy kéo 4 bánh 17-25 Hp. Báo cáo tổng kết đề tài KHCN cấp Bộ Mã số 2000-351.

    Tomasz Zelazinski and Adam Siwek (2016). Impact of rotational of extruder cutter on quality of corn extrudates in the fuction of raw material moisture and flow rate. Agriculture, 68: 131-140.

    Zhong Tang, Yaoming Li (2017). Development of multi-functional combine harvester with grain harvesting and straw baling. Spanish Journal of Agricultural Reasearch, 15(1): p. e0202.