Determining theHeight of Mesh - Type Air -Termination Installmentabove TheFlat Roof According to Standard TCXDVN9385:2012to Increase Interception Efficiencies

Received: 22-12-2014

Accepted: 30-07-2015

DOI:

Views

0

Downloads

0

Section:

KỸ THUẬT VÀ CÔNG NGHỆ

How to Cite:

Uoc, N., Tien, D., Kinh, N., & Thuan, N. (2024). Determining theHeight of Mesh - Type Air -Termination Installmentabove TheFlat Roof According to Standard TCXDVN9385:2012to Increase Interception Efficiencies. Vietnam Journal of Agricultural Sciences, 13(5), 215. http://testtapchi.vnua.edu.vn/index.php/vjasvn/article/view/215

Determining theHeight of Mesh - Type Air -Termination Installmentabove TheFlat Roof According to Standard TCXDVN9385:2012to Increase Interception Efficiencies

Ngo Quang Uoc (*) 1 , Dao Xuan Tien 1 , Nguyen Ngoc Kinh 1 , Nguyen Huu Thuan 1

  • 1 Khoa Cơ Điện, Học viện Nông nghiệp Việt Nam
  • Keywords

    mesh method, standard TCXDVN9385:2012, the rolling - sphere method

    Abstract


    The minimum height of mesh according to standard TCXDVN9385:2012 was not clearlydefined. The aim of this study was to propose theheight of mesh-type air - terminationaccording tothe standard TCXDVN9385: 2012 to achieve high protection. When buildingsnot higherthan 20m, a mesh width of 5m x 10m and 10m x 20m can beinstalled at a height 16cmand21cm, respectively. If the height of buildings greater than 20 m rolling - sphere method,with 4 mesh type are 5m x 5m,10m x 10m,15m x 15m and 20m x 20m atminimum height of 5cm, 10cm,15cm,and 20cm, respectively, can be used..

    References

    Tiêu chuẩn Việt Nam TCXDVN9385:2012 (2012). Chống sét cho công trình xây dựng - hướng dẫn thiết kế, kiểm tra và bảo trì hệ thống, Hà Nội.

    IEC 62305 - 3 Edition 2.0 (2010). Protection against lightning - Part 3: Physical damage to structures and life hazard.

    Alexander Kern, Christof Schelthoff, Moritz Mathieu (2012). Calculation of interception efficiencies for mesh - type air - terminations according to IEC 62305 - 3 using a dynamic electro - geometrical model, 2012 International Conference on Lightning Protection (ICLP), Vienna, Austria.

    Sen P.K. (2001). P.E: Understanding Direct Lightning Stroke Shielding of Substations.

    Ngô Quang Ước, Đào Xuân Tiến, Vũ Hải Thuận, Nguyễn Thị Huyền Thanh, Nguyễn Hữu Thuần (2014). Nghiên cứu và thiết kế hệ thống chống sét tiêu chuẩn cho khu vực Học viện Nông nghiệp Việt Nam, Đề tài cấp Học viện, Mã số T2013-05-20.